Operation Manual

Troubleshooting
Operating Instructions 610-10/630-10 - 00.0 - 01/2016122
2253 Error Excess voltage • Check the mains voltage
2255 Error Y-axis stepper motor
overload (I²T):
• Stepper motor not moving
fr
eely or blocked
• Stepper motor defective
• Controller defective
• Remove the blockage or the
cause of the stif
f movement
• Replace the stepper motor
• Replace the controller
2256 Error Y-axis stepper motor:
• Stepper motor not moving
fr
eely
• Stepper motor defective
• Controller defective
• Correct the cause of not moving
fr
eely
• Replace the stepper motor
• Replace the controller
2262 Error Y-axis stepper motor distur-
bance (IDMA auto increment)
• Switch the machine off and on
aga
in
2271 Error Watchdog • Switch the machine off and on
aga
in
• Performing a software update
• Contact Customer Service
2272 Error Stepper motor overvoltage:
• Stepper motor card defective
• Replace the controller
2273 Error Y-axis stepper motor error • Check the connection
• Test stepper motor phases
(R = 2.8Ω, high impe
dance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
2274 Error Software error • Perform reset
• Performing a software update
• Contact Customer Service
2275 Error Magnet wheel search • Check the connection
• Test stepper motor phases
(R = 2.8Ω, high impe
dance to
PE)
• Replace the encoder
• Replace the stepper motor
• Replace the controller
Code Type Possible causes Remedial action