Operation Manual

Troubleshooting
Operating Instructions 610-10/630-10 - 00.0 - 01/2016118
1060 Error PowerParts • Replace the controller
1061 Error Sewing motor disturbance:
• Encoder defective
• Sewing motor defective
• Switch the machine off and on
aga
in
• Replace the encoder
• Replace the sewing motor
• Contact customer service
1062 Error Sewing motor disturbance (IDMA
auto increment)
• Switch the machine off and on
aga
in
1120 Error Software error:
• Parameter not initialized
• Performing a software update
1203 Information Sewing motor:
Position not reached
• Switch the machine off and on
aga
in
• Performing a software update
• Contact Customer Service
1302 Error Sewing motor current error:
• Sewing motor blocked
• Encoder cable not connected
or
defective
• Encoder defective
• Remove the blockage
• Check the encoder cable and
r
eplace, if necessary
• Replace the sewing motor
1330 Error Sewing motor not responding • Switch the machine off and on
aga
in
• Performing a software update
• Contact Customer Service
2102 Error X-axis stepper motor:
• Stepper motor not moving
fr
eely or blocked
• Encoder cable not
connected or defective
• Stepper motor cable not
connected or defective
• Encoder defective
• Stepper motor defective
• Remove the cause of the stiff
movement o
r blockage
• Check the encoder cable and
r
eplace, if necessary
• Replace the encoder
If the stepper motor is not supplied
with cu
rrent:
• Check the stepper motor cable
and
replace, if necessary
• Replace the stepper motor
2103 Error X-axis stepper motor step losses:
• Stiff mechanical movement or
blocka
ge
• Remove the cause of the stiff
mechanical movement or
blockage
Code Type Possible causes Remedial action