Operation Manual

Setup
Operating Instructions 610-10/630-10 - 00.0 - 01/2016104
7.7.1 Connecting the controller
Fig. 61: Connecting the controller
To connect the controller:
1. Lay all cables (1) to the controller and fix them in place with
ca
ble ties.
2. Insert all plugs (2) following the marking on the rear of the
co
ntroller.
Important
Cable (1) and connection (3) have the same designation /
sy
mbol!
(1) - Cable
(2) - Plugs
(3) - Connection
①
② ③