Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/201596
 By pressing the Abort button, the selection window is closed
and the AUTO user interface is displayed again. All data
input is then deleted!
Adjustable parameters
The following table describes the adjustable parameters in the
pr
ogramming mode PROGRAMMING.
Function Interface
Mirror programmed side to other side AUTO mode
Program other side PROGRAMMING mode
Finish AUTO mode
Icons Meaning
Input program names.
In the PR
OGRAMMING mode, only
one display. The next free channel is
automatically assigned to a new
program.
Select right or left sewing part
Set the sewing material size,
 pg. 98
Other program parameters in the
pro
gramming mode PROGRAMMING,
 pg. 100.
Set fullness in the current segment,
 pg. 99
Set needle thread tension in the current
segment