Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 93
7.7.2 Create new program (PROGRAMMING)
Prerequisite:
• The operating mode EDIT is displayed.
1. Press the P
NEW
button.
 The PROGRAMMING
user interface is displayed. The
number of the next free channel is displayed via the P button.
Fig. 49: Programming mode PROGRAMMING
2. Press <No Name> and enter name.
Information on inputting text:  pg. 71.
If no name is entered for the seam program, <No Name>
continues
to be displayed.
 In the area on the left, the first segment with number is shown.
3. All parameters are input for the first segment.
4. Using the buttons TF
on and TF off, set whether the tape feed
is switched on or off in the segment (only applies to 610 sewing
machine).