Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 91
1. Select type of fullness.
 The selected type is displayed by an activated control field
in the icon.
2. If a higher or lower fullness is required, display further buttons
using
the arrow buttons.
3. Input fullness with the buttons 0 to 16.
EDIT mode Other program parameters
After pressing the button Progra
m parameters, an overview
of all available parameters in EDIT mode
is first displayed.
Fig. 47: Program parameters in the programming mode EDIT.
Parameter Meaning
Stitch Condensing at Start Stitch condensing at the start of the seam
on/of
f
Value range: 0, 1
Stitch Condensing at End Stitch condensing at the end of the seam
on/of
f
Value range: 0, 1