Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 89
1. Press the desired button.
 The user interface for adjusting the desired parameter is
displ
ayed.
With some parameters, the
setting extends beyond a numerical
value. These structured parameters are explained in the following.
EDIT mode Setting the sewing material size
Fig. 45: Setting the sewing material size parameter
The following information is displayed:
• The currently selected size is marked with a double
ar
row (>>).
• The sizes marked in red represent the reference sizes
for the grading logic.
1. Press the desired sewing material size.
 The user interface of the programming mode ED
IT is
displayed.