Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/201588
7.7.1 Edit existing program (EDIT)
The following table describes the adjustable parameters
in the programming mode EDIT.
Icons Meaning
Edit program names
In the EDIT mode, o
nly one display.
The next free channel is automatically
assigned to
a new program.
Select right or left sewing part
Set the sewing material size,
 pg. 89
Other program parameters in the
pro
gramming mode EDIT,
 pg. 91.
Set fullness in the current segment,
 pg. 90
Set needle thread tension in the current
segment
Set stitch length in mm in the current
segment
Switch path measurement on
and off in the current segment
Other segment parameters in the
pro
gramming mode EDIT,
 pg. 92.