Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 87
7.7 Programming mode
Fig. 44: Programming mode
Header (1)
The operating mode EDIT is d
isplayed. Using the buttons TF on
or TF off, the tape feed is switched on and off (only 610 sewing
machine).
Left-hand area (2)
The graphic display of the entire seam is shown here, divided into
the
programmed number of segments.
Central area (3)
Here existing seam programs can be modified  pg. 88.
The number and the name of the selected seam program and the
i
cons of all adjustable parameters are displayed. The gray fields
above the parameter icons display the relevant current values.
Right-hand area (4)
Here new seam programs can be created  pg. 93, existing
seam programs can be deleted,  pg. 103 copied  pg. 103
and optimized  pg. 104 (Length Correction).
②
③
④
①