Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/201586
Quick correction of the fullness before or during sewing
1. Bring the foot pedal to po
sition 0.
2. Change the fullness by pressing on the buttons +F
% and -F%.
3. Press the foot pedal forwards again and sew.
 The changed fullness is used for sewing and displayed
on the control panel.
Changing parameters during sewing
1. Bring the foot pedal to po
sition 0.
2. Change desired parameters on the control panel.
3. Press the foot pedal forwards again and sew.
 The changed parameter value is used.
Canceling the seam program
1. Release pedal completely.
 The seam program is canceled.