Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/201580
AUTO mode Program selection
Fig. 38: Program selection parameter
1. Press the desired seam program.
 The selected seam program is marked by an activated
co
ntrol field in the line.
2. Press the OK b
utton.
 Selected seam program is acce
pted in automatic mode
AUTO.
3. Press the Abort bu
tton in order to cancel the program
selection.
 If required, the selected seam progra
m is rejected and
the user interface of automatic mode AUTO is displayed.