Operation Manual

Settings via software

Operating Instructions 610-01/630-01 - 02.0 - 08/2015 79

7.6.1 Adjustable parameters AUTO

The following table describes the adjustable parameters

in the automatic operating mode AUTO.

1. Press the desired button.

 The user interface for adjusting the desired parameter is

displayed.

With some parameters, the setting extends beyond a numerical

value. These complex-structured parameters are explained in the

following.

Icons Meaning

Program selection,

 pg. 80

Select right or left sewing part

Set the sewing material size,

 pg. 81

Other program parameters in automatic

mode AU

TO,

 pg. 84.

Set fullness temporarily until the

segment,

 pg. 82

Correct fullness in % for all segments,

 pg. 83

Adjust the needle thread tension. If the

value is cha

nged in automatic mode

AUTO, it is saved permanently

in the program.

Set stitch length in mm. If the value

is changed in automatic mode AUTO,

it is saved permanently in the program.