Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 75
MAN mode Setting the fullness
The following table explains the individual icons and buttons
for the manual adjustment of fullness.
1. Select type of fullness.
 The selected type is displayed by an activated control field
in the icon.
2. If a higher or lower fullness is required, display further buttons
using
the arrow buttons.
3. Input fullness with the buttons 0 to 16.
Icons/buttons Meaning
Input fullness
Set fullness is displayed by a button
mark
ed in red.
Selection of fullness:
• Top (top feed)
• Bottom (bottom feed)
• Top and bottom (differential between
to
p and bottom feed).
The selected fullness is displayed
by an activated control field.
Display of further buttons used to input
fullness. The b
uttons from 0 to 16 are
available for inputting figures.