Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 67
7 Settings via software
7.1 Control panel OP7000
All settings on the 610-01/630-01 sewing machine are made using
the OP7000 control panel.
Fig. 32: Control panel OP7000
The sewing motor and the stepper motors are actuated via the
DAC3 controller in conjunction with the OP7000 control panel with
its icon-display user interface.
The automated programming enables manual or automatic full-
ness control, either at th
e top or the bottom, curve support as well
as the programming of segments with individual parameters.
Up to 999 sewing programs can be saved.
Each sewing program can contain up to 30 segments. Every
se
gment can be assigned various parameters such as stitch
length, fullness amounts, curve support, thread tension, segment
length etc.
The seam programs are shown co
ntinuously during sewing.
It is possible to mirror a program for the other side of the sewing
material.