Operation Manual

About these operating instructions
Operating Instructions 610-01/630-01 - 02.0 - 08/20154
1.3 Representational conventions – Symbols
and characters
Various items of information are depicted or highlighted in these
operating instructions by the following characters to make them
easier to understand:
Safety Important warnings for the user of the mach
ine are specifically
marked. Because safety constitutes an area of major importance,
hazard symbols, levels of risk, and their signal words are described
separately in Chapter  3 Safety instructions, p.
13.
Location
in
formation
Information on where something is positioned using the terms
“right” or “left” must always be regarded from the operator’s point
of view if the figure gives no other obvious indication for determin-
ing the location.
1.4 Other documents
The device contains built-in components from other manufactur-
ers. The respective manufacturers have carried out hazard as-
sessments for these purchased parts
and confirmed compliance
of the design with the applicable European and national regula-
tions. The intended use of the built-in components is described in
the corresponding manuals of the manufacturers.
Symbol/character Meaning
•
Lists are identified by bullet points.
1.
2.
Instructions are numbered and have to be performed
in the specified order.

References to further information in these operating
instructions or other documents are identified by
this symbol.