Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 51
Use only DA 10 lubricant or an equivalent oil conforming to the
following specifications to lubricate the special sewing machine:
• Viscosity at 40°C: 10 mm²/s
• Flash point: 150°C
DA 10 can
be obtained from DÜRKOPP ADLER AG sales offices
under the following part no.:
Container size Part no.
250 ml container 9047 000011
1 L container 9047 000012
2 L container 9047 000013
5 L container 9047 000014
Maintenance Explanations Interval
Machine
u
pper section
• Remove any
se
wing dust
and thread
remains (e.g.
using the
compressed-
air pistol)
Points that need to be cleaned
p
articularly thoroughly:
• Area under the throat plate
• Area around the looper
• Area around the thread pick-up disk
• Thread cutter
• Area around the needle
Attention
Hold the compressed-air pistol in such
a
way that the sewing dust is not blown
into the oil pan.
8 operating
ho
urs
Sewing drive
Clean the
moto
r fan
sieve
(e.g. with the
compr
essed-
air pistol)
Clean the sewing dust and thread
r
esidue from the air inlet openings.
8 operating
ho
urs