Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/201548
5.13.2 Checking the pneumatic system
Fig. 22: Pressure indicator on the maintenance unit
Check the pressure:
1. Check the pressure on the pressure indicator (2) each day.
Reference value: 6 bar.
Important: Th
e pressure must not deviate from the reference
pressure by more than 1 bar.
Condensed water accumulates in the water separator of the
maintenance unit.
0
2
8
4
6
10
1
2
(1) – Reference value: 6 bar (2) – Pressure indicator
Machine damage possible due to incorrect pressure.
Incorrect pressure can cause damage to the machine.
Check the pressure on a daily basis.
Have the pressure adjusted by qualified specialists if the pres-
sure deviates from the reference value.
ATTENTION