Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 45
START
OF SEWING
Initial position
1. Switch on the sewing machine.
2. Pedal position 0:
 Machine stationary, needle up, sewing foot down.
To position the s
ewing material
1. Press the foot pedal half-way back to
pedal position -1:
 The sewing foot is raised.
2. Push the sewing material into the initial position.
3. Release the foot pedal to pedal position 0.
 The sewing foot lowers onto the sewing material.
To start sewing
1. Press the foot pedal forwards to pedal position +1:
 The machine sews. The sewing speed increases the further
forw
ard the pedal is pressed.
WHEN SEWING
To interrupt sewing
1. Release the foot pedal to pedal position 0:
 The machine stops, needles and sewing foot are down or up,
as a
ppropriate.
To continue sewing
1. Press the foot pedal forwards to pedal position +1:
 The machine continues to sew.
END
OF SEWING
To finish sewing
1. Press the foot pedal back completely to pedal position -2 and
hold
it there.
 The thread is cut.
The machine stops.
Needle and sewing foot are raised or lowered, as appropriate.
2. Remove the sewing material.