Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/201542
Setting the sewing foot pressure on the top feed foot:
Important: Only ch
eck the sewing foot pressure of the top feed
foot if the top feed foot is lying on the feed.
1. Setting the sewing foot pressure.
• T
o increase the sewing foot pressure:
Turn the adjusting wheel (1) clockwise.
• T
o reduce the sewing foot pressure:
Turn the adjusting wheel (1) counterclockwise.
5.10 Lifting the sewing foot
To insert or feed the sewing material, the sewing foot is lifted
electropneumatically with the foot pedal.
Fig. 19: Lifting the sewing foot
1. Press the foot pedal half-way back: Pedal position -1 (3).
 The sewing foot is lifted and remains up as long as the foot
peda
l is kept in that position.
End of sewing
1. Press the foot pedal fully back: Pedal position -2 (4).
 The thread cutter is activated and the sewing foot is lifted.
(1) – Pedal position +1:
Sewing active
(2) – Pedal position 0:
Rest position
(3) – Pedal position -1:
Lifts sewing foot
(4) – Pedal position -2:
Sews stitch condensing
and cuts thread
④
②
③
①