Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 29
• For elastic seams (detail image (b)):
Feed the thread through the thread lever (9) and then via the
left b
ar of the thread regulator (8) (WARNING – Exaggerated
depiction for better visibility).
11. Feed the thread from above down
wards through the thread
guide (10) on the machine head.
12. Feed the thread from above forwards and downwards to the
re
ar through the thread guide (11) on the needle bar.
13. Insert the thread from the front to the back through the needle
eye (12).
5.6 Threading the looper thread
Fig. 9: Fitting the looper thread reel
1. Fit the thread reel on the right plate of the reel stand (2).
2. Insert the thread from the back to the front throug
h the first
hole and then in a wavelike manner through the next two holes
of the guide on the unwinding bracket (1).
Important: T
he unwinding bracket (1) must be parallel to the
reel stand (2).
Risk of injury from moving parts.
Switch off the sewing machine before inserting
the thread.
WARNING
(1) – Guide on unwinding bracket (2) – Reel stand
②
①