Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/201528
Important: The thread must always be fed around the rele-
vant tensioning disk such that it covers the greater distance
from thread guide (2) to thread guide (4).
7. Insert the thread through the thread guide (4).
8. Insert the thread from the right to the left through the thread
pull
er (5).
Fig. 8: Threading the needle thread – Part 2
9. Feed the thread from the right to the left through the deflector (7).
10. Insert the thread from right to left through the thread
re
gulator (8) and the thread lever (9):
• Fo
r tight/normal seams and less elastic threads
(detail image (a)):
( 5
.7 Adjusting the thread quantity, thread tension and
seam appearance, pg. 32)
Feed the thread through the thread lever (9) and then
directly downwards.
(7) – Deflector
(8) – Thread regulator
(9) – Thread lever
(10) – Thread guide, machine head
(11) – Thread guide, needle bar
(12) – Needle eye
(a) (b)
⑦
⑧
⑨
⑩
⑪
⑫