Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/201526
5.5 Threading the needle thread
Fig. 5: Fitting the needle thread reel
1. Fit the thread reel on the left plate of the reel stand (2).
2. Insert the thread from the back to the front throug
h the first
hole and then in a wavelike manner through the next two holes
of the guide on the unwinding bracket (1).
Important: T
he unwinding bracket (1) must be parallel
to the reel stand (2).
Risk of injury from the needle point and moving
parts.
Switch off the sewing machine before replacing
the needle.
WARNING
(1) – Guide on unwinding bracket (2) – Reel stand
②
①