Operation Manual

Operation
Operating Instructions 610-01/630-01 - 02.0 - 08/201524
5.3 Preparing the sewing machine for operation
Some preparations are required before the sewing machine can
be used to start sewing. The following table shows which aspects
have to be checked or met.
Aspect Reason
Connecting the
compr
essed air
The sewing machine must be connected to the
compressed air supply, as otherwise important
functions, such as tape feeding, are not
possible.
Fitting the thread reel The thread reels must be fitted as otherwise
there w
ill be no thread available for sewing.
Checking the needle The needle must be present, as sewing cannot
t
ake place without a needle. The needle must
be aligned correctly, otherwise the looper
cannot form a loop and sewing cannot be
performed.
Threading the needle
thr
ead
The needle thread must be threaded in,
as sewing cannot take place without
the needle thread.
Threading the looper
thr
ead
The looper thread must be threaded in,
as sewing cannot be performed without
the looper thread.
Inserting tape
(
610 only)
The tape must be inserted, as without the tape
the taping work step cannot be performed.
Optional:
Carrying out a test run
A test run can be used to check the settings,
but is not
mandatory.