Operation Manual

Safety instructions
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 13
3 Safety instructions
This section contains basic instructions for your safety. Read the
instructions carefully before setting up or operating the sewing
machine. Make sure to follow the information included in the safety
instructions. Failure to do this can result in serious injury and
damage to the machine.
3.1 Basic safety instructions
The sewing machine may only be used as described in these
operating instructions.
The operating instructions must be available at the machine’s
l
ocation at all times.
Work on live components and equipment is prohi
bited. Exceptions
are defined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from
the
power supply using the main switch or by disconnecting
the power plug:
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
Missing or faulty spare parts could impair safety and damage
the machine. Therefore only use original spare parts from
the manufacturer.
Transportation Use a lifting carriage or forklift to transport the machine.
Ra
ise the machine max. 20 mm and secure it against slipping off.
Setup The connecting cable must have a power plug approved in
the specific country. The power plug may only be connected
to the power cable by a qualified specialist.