Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 105
Fig. 57: Length correction continued
4. Proceed in this manner for all other segments.
5. After the last segment, press the EN
D button.
 Length correction is completed, the EDIT programming
mo
de opens.
7.8 Service mode SERVICE
In service mode, there are functions that can be used
for servicing work.
Service mode is password-protected, in order to avoid
u
nintentionally making incorrect machine settings.
More precise information on the contents of service
mode are provided in  Service Instructions.