Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015 103
7.7.3 Copying a seam program
Prerequisite:
• The operating mode EDIT is displayed.
1. Select the seam program,  pg. 80.
2. Press the P
COPY
button.
 Seam program is copied and saved on
the next free channel.
A message to that effect is displayed.
7.7.4 Deleting a seam program
Prerequisite:
• The operating mode EDIT is displayed.
1. Select the seam program,  pg. 80.
2. Press the P
DEL
button.
 A message asking whether the active
seam program is to be
deleted is displayed.
3. Confirm deletion by pressing the Ye
s button.
Seam program is deleted. A message to
that effect is displayed.