Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/2015100
1. Select type of fullness.
 The selected type is displayed by an activated control field
in the icon.
2. If a higher or lower fullness is required, display further buttons
using
the arrow buttons.
3. Input fullness with the buttons 0 to 16.
PROGRAMMING
mode
Other program parameters
After pressing the button Oth
er program parameters, an over-
view of all available parameters is displayed.
Fig. 54: Other program parameters
Parameter Meaning
Stitch Condensing at Start Bartack at start of seam.
Value range: on/off
Stitch Condensing at End Bartack at end of seam.
Value range: on/off
Thread Trim Thread cutter on/off.
Value range: 0, 1