Operation Manual

About these instructions
Instruction manual 550-532 - 00.0 - 07/2015 7
Information
Additional information, e.g. on alternative operating options.
Sequence
Specifies the work to be performed before or after a setting.
References
 Reference to another section in these instructions.
Safety Important warnings for the machine users are specially designat-
ed. Since safety is of particular importance, hazard symbols, levels
of danger and their signal words are described separately in
 3 Safety, p. 15.
Orientation If the figure is unclear, indications of right or left are always from
the user's point of view.
1.4 Other documents
The machine includes components from other manufacturers.
Each manufacturer has performed a hazard assessment for these
purchased parts and confirmed their design compliance with ap-
plicable European and national regulations. The proper use of
these components is described in each manufacturer's
instructions.
1.5 Liability
All information in these instructions was compiled with consider-
ation to the state of the art, and applicable standards and
regulations.
The manufacturer cannot be held liable for damages resulting
from:
• Breakage and damage during transport
• Failure to observe these instructions
• Improper use
• Unauthorized modifications to the machine