Operation Manual

Sewing process
Instruction manual 550-532 - 00.0 - 07/2015 73
9 Sewing process
Prerequisite:
• Machine is in sewing mode, Ready key LED illuminates.
• Needle is fitted.
• Needle thread is threaded.
• Seam pattern is selected.
• Button feeder has been set up and tested.
WARNING
Risk of injury from the transfer arm and moving
parts!
Hold the sewing material in place with extreme
caution, paying particular attention to the moving
transfer arm.
Sewing process Operation / Explanation
Starting situation
before sewing
Pedal is in the rest position. Sewing automat is
at a standstill. Needle raised, clamp raised.
The Ready key LED illuminates.
Button feeder is on, buttons are transported
and separated.
Sewing • Insert the sewing material.
• Press the pedal forwards to the 1st position.
The clamp lowers.
• Release the pedal.
The clamp raises.
• Position the sewing material.
• Briefly press the pedal fully forwards.
The sewing automat sews at the configured
speed.
The button feeder transfers a button.
Interrupting the sewing
process in the middle
of the sewing cycle
Press the Reset key or press the pedal
backwards.
The sewing automat stops. The clamps remain
lowered.
Continuing the sewing
process in the middle
of the sewing cycle
Press the pedal briefly forwards all the way or
press the Reset key.