Operation Manual

Settings via software (button feeder)
Instruction manual 550-532 - 00.0 - 07/2015 71
8.4 Setting button feeder mode
Fig. 30: Setting button feeder mode
You can choose from 3 feeder modes:
• AUTO: Automatic - the buttons are fed automatically. If
automatic feeding fails, the button needs to be fed manu-
ally by operating the switch (2).
• SEMI: Semi-manual - the buttons are fed by operating the
switch (2).
• MANU: Manual - the buttons must be inserted into the but-
ton mount by hand and one at a time. Operating the
switch (2) opens and closes the button clamp.
1. When feeding buttons for the first time, use SEMI mode to
test the button transfer.
Setting SEMI mode and feeding the button
1. Press the  /  key until SEMI mode is highlighted with a
colored background.
2. Operate the switch (2).
 Button is fed.
(1) - Feeder modes (2) - Switch
①
②