Operation Manual

Settings via software (button feeder)
Instruction manual 550-532 - 00.0 - 07/2015 67
8 Settings via software (button feeder)
8.1 Control panel - button feeder
Fig. 26: Control panel - button feeder
(1) - Display
(2) - Numeric keys
(3) - Control keys
Key Function
Select button feeder mode (AUTO/SEMI/MANU)
 8.4 Setting button feeder mode, p. 71
Button feeder speed
 8.5 Setting button feeding speed, p. 72
Measure button diameter
 8.3 Setting button diameter and button height,
p. 70
Save button diameter
 8.3 Setting button diameter and button height,
p. 70
Transfer arm in service position
Reset daily piece counter
Press the key for at least 3 seconds before
pressing the key for at least 3 seconds.
①
②
③