Operation Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015 63
7.21Loading software from a USB key
When a new software version is available, this can be downloaded
from www.duerkopp-adler.com and loaded into the controller via
a USB key.
Important
The following files must be stored on the USB key:
• FUYSTS.BT
• LEEYSTS.BT1
•BT1mot
•BT1PAT
E913Error
Thread-pulling
knife search
Thread-pulling knife sensor
not responding
•Main switch OFF.
• Check the sensor.
E914Error
Thread-pulling
knife motor
Thread-pulling knife motor
not running correctly
•Main switch OFF.
• Check the motor and
connections.
Error message Description Possible cause Remedy
NOTICE
Interrupting the copy process can damage the machine.
Never pull out the USB key during the copy process.
Only pull out the USB key after the specified copying time.