Operation Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/201562
E 5 1 1 USB write error File with the same name
already present
• Delete or rename the file.
E 5 1 2 USB read error Data cannot be loaded from
the USB key
• Check the USB key.
• Plug in the USB key
again.
E 5 1 3 USB write error Data cannot be copied to the
USB key.
• Check the USB key.
• Plug in the USB key
again.
E 5 5 0 Data write error Flash memory transfer error • Main switch OFF.
• Repeat the procedure.
• Replace the mainboard.
E 5 5 1 Internal process
error
Software error • Main switch OFF.
• Repeat the procedure.
• Replace the mainboard.
• Replace the software.
E7
7
0
3
7
5
Motor signal
error
Encoder / motor has no
signal
• Check the motor /
encoder.
E 7 3 6 Motor rotation
error
Motor stops after a certain
time / encoder has no signal
• Check the motor /
encoder.
E 7 3 7 Z phase error Z signal no longer changes • Check the motor /
encoder.
E 7 3 8 Z phase error Z signal inaccurate / encoder
has no signal
• Check the motor /
encoder.
E907Search error
X axis
X axis sensor not responding • Main switch OFF.
• Check the sensor.
E908Search error
Y axis
Y axis sensor not responding • Main switch OFF.
• Check the sensor.
E910Error
Clamping foot
search
Clamping foot sensor not
responding
•Main switch OFF.
• Check the sensor.
E 9 1 1 Clamping foot
motor error
Clamping foot motor not
running correctly
•Main switch OFF.
• Check the motor and
connections.
E 9 1 2 Internal error - • Notify DA Service
Error message Description Possible cause Remedy