Operation Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/201552
7. Relocating the sewing pattern position:
• Press the Select key until the
X axis symbol LED flashes.
• Press the +/- Function keys and set the values: -5/+5.
• Press the Select key until the
Y axis symbol LED flashes.
• Press the +/- Function keys and set the values: -4 /+4.
8. Press the Ready key to confirm the settings.
9. Press the Memory key to exit the memory mode.
10. Check the seam pattern
( 7.6 Checking the seam pattern, p. 48).
7.12.2 Sewing with the memory keys
1. Press the desired seam pattern memory key
(or key combination).
2. Press the Ready key.
3. Check the seam pattern form.
4. Sew with the selected seam pattern.
7.12.3 Deleting the memory key assignments
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1. Press the Memory key and key P2 at the same time.
2. Press the +/- Program keys to select a memory location.
3. Press the Ready key to confirm the memory location.
4. Press the Reset key to delete the memory assignment.
5. Press the Ready key to confirm the deletion.
6. Press the Memory key to exit the memory mode.