Operation Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015 51
7.12Saving seam patterns
Standard seam patterns can be stored under the seam pattern
keys P1 to P5, with a total of 50 memory locations available.
The memory locations are called up via the +/- Function keys,
the memory locations up to number 25 can also be called up using
single seam pattern keys and combinations of these.
Sewing pattern memory key combinations
7.12.1 Assigning the memory keys
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1. Press the Memory key and key P2 at the same time.
2. Press the +/- Program keys to select a memory location.
3. Press the Ready key to confirm the memory location.
4. Select a seam pattern
( 7.2 Setting the seam pattern, p. 45).
5. Set the button hole spacing
( 7.4 Setting the button hole spacing, p. 47).
6. Set the speed ( 7.5 Setting the speed, p. 48).
Memory
number
Key
combination
Memory
number
Key
combination
Memory
number
Key
combination
Memory
number
Key
combination
P1 P1 P8 P1 + P4 P15 P4 + P5 P22 P2 + P3 + P4
P2 P2 P9 P1 + P5 P16 P1 + P2 + P3 P23 P2 + P3 + P5
P3 P3 P10 P2 + P3 P17 P1 + P2 + P4 P24 P2 + P4 + P5
P4 P4 P11 P2 + P4 P18 P1 + P2 + P5 P25 P3 + P4 + P5
P5 P5 P12 P2 + P5 P19 P1 + P3 + P4
P6 P1 + P2 P13 P3 + P4 P20 P1 + P3 + P5
P7 P1 + P3 P14 P3 + P5 P21 P1 + P4 + P5