Operation Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015 45
7.2 Setting the seam pattern
Prerequisite:
• Machine is in programming mode, Ready key LED is off; see
 7.1 Control panel - machine, p. 43.
1. Press the +/- Function keys until the seam pattern number
(see table below) is shown in the Function display.
NOTICE
Damage to the needle if the size of the seam pattern does
not match the clamping foot.
Check the clamping foot and adjust if necessary.
No.
Stitch
pattern
Stitch
distribution
Size
(mm)
X x Y
No.
Stitch
pattern
Stitch
distribution
Size
(mm)
X x Y
1/34 6 - 6 3.4 x 3.4 18/44 6 3.4 x 0
2/35 8 - 8 19/45 8
3 10 - 10 20 10
4 12 - 12 21 12
5/36 6 - 6 3.4 x 3.4 22 16
6/37 8 - 8 23/46 6 0 x 3.4
7 10 - 10 24 10
8 12 - 12 25 12