Operation Manual

Operation of the button feeder
Instruction manual 550-532 - 00.0 - 07/201540
6.4 Setting the button transport choke
Fig. 19: Setting the choke
The choke (1) is set such that the buttons are transported to the
transfer station by a short burst of air. Heavier buttons require a
stronger burst of air than lighter buttons.
1. Check the button transport.
2. Loosen the counternut (2).
3. Set the choke (1).
• clockwise: less air
• counterclockwise: more air
4. Re-tighten counternut (2).
(1) - Choke
(2) - Counternut
(3) - Air supply
①
②
③