Operation Manual

Operation of the sewing automat
Instruction manual 550-532 - 00.0 - 07/201532
5.9 Adjusting the position of the shank shaper
Fig. 9: Adjusting the position of the shank shaper
Pivoting the shank shaper in/out
1. Manually swing the pivot lever (1) with shank shaper (3) in and
out, with the button clamp raised.
Adjusting the height of the shank shaper
1. Loosen the screw (5).
2. Adjust the height of the shank shaper (3).
3. Tighten the screw (5).
Adjusting the position of the shank shaper
1. Loosen the setscrew (2).
2. Adjust the length of the shank shaper (3).
3. Tighten the setscrew (2).
(1) - Pivot lever
(2) - Setscrew
(3) - Shank shaper
(4) - Magnetic stop
(5) - Screw
①
⑤
③
④
②