Operation Manual

Operation of the sewing automat
Instruction manual 550-532 - 00.0 - 07/2015 23
5 Operation of the sewing automat
5.1 Threading the needle thread
1. Plug the thread reels onto the thread reel holder and feed the
needle and hook threads through the unwinding bracket.
 The unwinding bracket must stand horizontally above the
thread reels.
2. Thread the needle thread as shown in the following figure.
Fig. 2: Threading the needle thread
3. Pull the needle thread approx. 4 cm through the needle after
threading. This ensures reliable sewing-on.
4. When using silicone oil, also thread the needle thread through
the optional silicone lubricator (1).
CAUTION
Risk of injury from the point of the needle and
moving parts
Only thread the needle thread with the sewing
automat switched off.
(1) - Silicone lubricator (optional) (2) - Guide
①
②