Operation Manual

Technical Specifications
Instruction manual 550-532 - 00.0 - 07/201512
• A total of 50 button patterns can be stored under the 25 favor-
ite buttons.
• An electropneumatic feeding system is used to feed round flat
buttons with 4 and 2 holes to the machine.
• The buttons to be fed are separated by a vibrating system.
• The machine comes standard with a feeding system designed
to handle buttons with 2 and 4 holes.
• A feeding system for 3 and 5-hole buttons can be ordered as
optional equipment.
2.2 Declaration of Conformity
The machine complies with the European regulations specified in
the Declaration of Conformity or in the Declaration of Incorporation.
2.3 Additional equipment
A flexible system of additional equipment allows the machine to
be optimally equipped for any application at low cost.
 = Standard
= Optional
Part no. Additional equipment
550-532
9880 001011 Parts set - marking lamp
Kit including marking lamp, power supply and fas-
tener. Power supply for up to 2 marking lamps

0510 590034 Marking lamp
additional marking lamp for marking lamp kit
9880 001011
