Operation Manual

About these instructions
Instruction manual 550-532 - 00.0 - 07/20158
• Use of untrained personnel
• Use of unapproved replacement parts
1.5.1 Transport
Dürkopp Adler cannot be held liable for breakage and transport
damages. Inspect the delivery immediately upon receiving it. Re-
port any damage to the last transport manager. This applies even
if the packaging is undamaged.
Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.
Report all other complaints to Dürkopp Adler immediately after
receiving the product.
1.5.2 Proper use
The 550-532 is intended for sewing light to moderately heavy
material. Light to moderately heavy sewing material requires a
needle strength of 80-110 Nm.
The machine is intended only for use with dry sewing material.
The sewing material must not contain any hard objects.
The seam is produced using core spun threads, polyester fibers,
or cotton threads.
The machine is intended for industrial use.
The machine may only be set up and operated in dry conditions on
well-maintained premises. If the machine is operated on premises
that are not dry and well-maintained, then further measures may
be required which must be compatible with DIN EN 60204-31.
Only authorized persons may work on the machine.
The manufacturer cannot be held liable for damages resulting from
improper use.