Operation Manual

4.5 Winding the Hook Thread

–

Slip the bobbin onto the bobbin winder 2.

–

Pull the thread through the guide 3 and the tension 4.

–

Wind the thread clockwise about 5 times around the bobbin core

and tear off at the thread clamp.

–

Swing the bobbin winder lever 1 towards the bobbin .

–

Sewing

The bobbin winder lever will stop the winding process as soon as

the bobbin is full.

ATTENTION !

If the thread is not to be wound during sewing,

it is essential to arrest the sewing foot in the raised position.

(See chapter 4.10)

321