Operation Manual

Element Function
14 - Key block
Key F - Switching on tape tension
Key Y - Special functions
Key P - Programming key/Program number entry
Key E - Entry of partial program number
Key OH - O-distance with tape
Key O - O-distance without tape
Keys 1-15 - Calling up crimping values
Display - Display of the selected crimping values 1...15 1/2/3/4/5/6/7/8/9/10/...
Display of the current program step
Display of the selected model
a - Key - Needle high position
b - Key - Switching high pressure foot lift on/ off
c - Key - Switching edge cutter on/ off (-14/-16 only)
d - Key - Switching stitch condensation on/ off (-13/-14 only)
- Releasing tape clamp to thread reinforcing tape.
Closing tape clamp, simultaneously severing reinforcing
tape lengthways.
15 - Hand switch
- Running through the program steps
1-4 - LED Indicator
- Indicates the current rpm
Active LEDs Max. revolutions r/min
1234 3000
234 2500
34 2000
16 - Dial
- Switching on lower tape tension (-13/-14 only)
15dcb
a
14
1
2
4
3
16
8