Operation Manual

5. Maintenance
Caution Risk of Injury !
Before cleaning the machine turn the main switch off.
The maintenance work must be conducted at the latest after the
number of operating hours listed in the column "Intervals".
Shorter maintenance intervals may be required for materials with a
high lint build-up.
Procedure Intervals Remarks
Machine head
Removal of 8 Particularly at the following points:
lint accumulations Underside of the needle plate
Feed dog ridges
Area around the hook
The spaces of the multiple position cylinders
Area around the tape feed and the tape clamp
between feed dog support and bottom side of base
plate.
Check the oil level in 40 See topic 2.1 (Element 10)
the reservoirs
Maintenance unit
Clean the insert in air filter 500 Vent the system first
Check all compressed air 500
connections for leaks
Hopper Foot bearing point 8 1-2 drops of ESSO SP-NK 10 oil
26