Operation Manual

2.5 Optional Equipment reinforcing
2.5.1 General
With the
optional reinforcing equipment
the cut edge of the material
is secured (reinforced) by attaching tape .
The tape feeder automatically feeds the reinforcement tape during
sewing.
The tape unwinder enables tension-free attaching of the reinforcement
tape.
After a programmed number of stitches the tape scissors cut the
reinforcement tape within the seam.
Thus, the reinforcement tape does not jut out at the material edges.
Exchangeable presser feet enable the use of 3 different reinforcement
tape widths.
Reinforcing can be performed either during automatic operation or
manual operation.
2.5.2 Optional equipment
Z129 3202
Tape unwinder for tension-free feeding of reinforcement ta-
pes
Z129 3002
Tape feeder and cutter for automatic feeding and cutting the
reinforcement tape
940 10010
Feeding foot specifically for reinforcing operations
Depending on the tape width:
940 10002
Presser foot with guide worm for 1.5-mm-wide reinforce-
ment tape
940 10022
Presser foot with guide worm for 2-mm-wide reinforcement
tape
940 10042
Presser foot with guide worm for 3-mm-wide reinforcement
tape
This also requires:
940 10050
Tape guide at the tape feeder for 3-mm-wide reinforcement
tape
10