Operating instructions

1.2 Sub classes
540-100-1
For the sewing of raised-form or flat-form linen buttonholes in light to
middle weight material, with electronically driven thread tensioner.
Buttonhole length max. 70 mm, buttonhole w idth max. 6 mm. A knife for
all cut lengths.
2. Technical data
Machine head: Class 540-100-1
Needle system:
System 265 with slightly rounded head
Needle thickness:
70 – 100 (dependent on equipment )
Threads:
Synthetic thread and synthetic thread with cotton covering
up to 65/2 Nm
Stitch type:
Double lockstitch ( 304 )
Stitch number:
Max. 4000 RPM (adjustable)
Double stitch distance:
0,2-3mm
Sewing foot stroke:
12 mm
Buttonhole length :
6 - 70 mm (dependent on equipment)
Buttonhole width:
3 - 6 mm (dependent on equipment)
Cut length:
6-65mm
Power rating:
1,3 kW
Operating pressure:
6 bar
Air consumption:
approx.4 NL per working cycle
Rated voltage:
1 ~ 230 V, 50/60 Hz
1~ 190 - 240 V, 50/60 Hz
Frame:
1060 x 620 x 1250 mm (L x B x H)
Work height:
780 - 880 mm (Top edge of table top)
Weight:
ca. 100 kg (with frame)
ca. 70 Kg (without frame)
Rated noise level :
Lc = 79 dB (A) Emission value per workplace according to
DIN 45635-48-B-1 (sewing cycle 3.6 s ON and 1.0 s OFF).
Buttonhole width: 4 mm
Cutting length: 17 mm
Speed: 4.000 min
-1
Stitch length: 0.6 mm
Fabric: G1 DIN 23328 two-ply
6