Operating instructions

1
P6.1/ P7.1 E Cross tack (vertical)
Tack stitch distance
P6.2/P7.2
0.2 ... 1.0 mm
Distance in the y-axis of a double stitch
Tack length
P6.3/P7.3
0.6 ... 6.0 mm
Length of the tack in the y-axis. The input of
parameter P7.3 is only possible when the top
and bottom tack types at are not similar!
Tack w idth
Right offset
P6.4/P7.4
-1.0 … 1.0 mm
The width of the tack is defined through the
buttonhole width. With the use of right offset
the width of the tack to the right can be
increased.
Tack w idth
Left offset
P6.5/P7.5
-1.0 … 1.0 mm
The width of the tack is defined through the
buttonhole width. With the use of left o ffset the
width of the tack to the left can be increased.
Moving tack at
the top
P6.6/P7.6
-1.0 … 0 mm
The position of the tack can be pushed down.
Moving tack at the
bottom
P6.6/P7.6
0…1.0mm
The position of the tack can be pushed up.
Tack tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
P6.1/ P7.1 G Eye tack
Tack w idth
P6.5/P7.5
2.0 … 6.0 mm
External diameter of the eye
Tack stitch number
P6.3/P7.3
2…50
Number of outer stitches, that will form the
semicircular tack.
Tack tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
The parameter of the special tack types H
simple tack are changed w ith the buttonhole
P6.1/ P7.1 H Simple tack (bartack), seam parameters.
Stitch distance within
the buttonhole seam
P4.2
0.2 … 1.0 mm
Distance in the y-axis of a double stitch
Buttonhole width
P4.3
1.0 … 6.0 mm
Total width of the buttonhole
Buttonhole seam
tension
P4.4
on / off
on: raised form
off: flat form
Stitch length of
tacking stitches
P4.6
0.2 … 3.0 mm
Stitch distance of tacking stitches
Thread tension of
tacking stitches P 4.7
on / off
Tacking stitch seam resistance
35