Operating instructions

P6.1/ P7.1 A cross tack(horizontal) , F Cross tack (divided)
Tack stitch distance
P6.2/P7.2
0.2 ... 1.0 mm
Distance in the y-axis of a double stitch.
Tack length
P6.3/P7.3
0.6 ... 6.0 mm
Length of the tack in the y-axis. The input of
parameter P7.3 is only possible when the top
and bottom tack types are not similar!
Tack width
Right offset
P6.4/P7.4
-1.0 … 1.0 mm
The width of the tack is defined through the
buttonhole width. With the use of the right
offset the width of the tack to the right can be
increased.
Tack w idth
Left offset
P6.5/P7.5
-1.0 … 1.0 mm
The width of the tack is defined through the
buttonhole width. With the use of the left offset
thewidthofthetacktotheleftcanbe
increased.
Tack tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
P6.1/ P7.1 B Round tack (to the middle point)
Tack stitch number
P6.6/P7.6
2…50
Number of stitches, that form the semicircular
tack.
Tacking tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
P6.1/ P7.1 C Taper tack
Tack stitch distance
P6.2/P7.2
0.2 … 1.0 mm
Distance in the y-axis of a double stitch
Tack length
P6.3/P7.3
0.6 … 9.0 mm
Length of the tack in the y-axis
Tack tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
P6.1/ P7.1 D Round tack (horizontal)
Tack stitch distance
P6.6/P7.6
0.3 … 1.0 mm
Distance in the y-axis of a double stitch
Tack tension
P6.7/P7.7
on / off
on: raised form tack
off: flat form tack
34