Operating instructions

ManualsBrandsDURKOPP ADLER ManualsBusiness equipment540 - 100

Table Of Contents

4.7.2 Adding a buttonhole at the end of a sequence

–

Select the last line “Buttonhole X: 0" in the programmed buttonhole

sequence with the arrow keys ñ and ò.

–

Press the OK-key.

–

Select the desired buttonhole program (1 to 50) with the arrow

keys ñ and ò.

–

Press the OK-key to confirm the selection.

With the confirmation of the buttonhole p rogram a new menu line

appears containing the buttonhole to be programmed.

–

Press the ESC-key to return to main menu.

4.7.3 Deleting a buttonhole within the buttonhole sequence

–

Select the buttonhole program line that is to be deleted with the

arrow keys ñ and ò.

–

Press the OK-key.

–

Select buttonhole program “0" with the arrow keys ñ and ò

–

Press the OK-key to confirm.

With the confirmation the selected buttonhole will be deleted. Following

buttonholes (if any) will move up.

–

Press the ESC-key to return to the main menu.

4.7.4 Inserting a buttonhole within the buttonhole sequence

Note

The insertion of a single buttonhole program within a buttonhole

sequence is not possible.

–

Make a note of the programmed buttonholes following.

–

Select the desired line of the programmed buttonhole sequence

with the arrow keys ñ and ò.

–

Press the OK-key.

–

Select the desired buttonhole program (1 to 50) with the arrow

keys ñ and ò.PresstheOK-key to confirm the setting.

–

Then alter the following buttonholes according to your notes.

–

Press the ESC-key to return to main menu.