Operating instructions

4.6.2 Switching the sequence mode on / off
Sw itching t he sequence mode on or off
–
Press the S-key.
The control panel changes to the menu for the programming of
buttonholes sequences.
–
With the arrow keys ñ and ò select the relevant line
–
Press the OK-key.
–
With the arrow keys ñ and ò choose between on(sequence mode)
or off (single buttonhole mode)
–
Confirm by pressing the OK-key.
–
To return to the main menu press the ESC-key.
4.6.3 Select a sequence in the sequence mode (Main menu)
After switching on, the top line of the display will appear white on
black. The last used sewing sequence will be displayed.
Select another sequence
–
Press the OK-key.
–
Moving between the sequences can be achieved by using the
arrow keys ñ and ò.
–
Confirm by pressing the OK-key.
4.6.4 Automatic or manual mode
02 ð 05 ð 12 ð 09 Automatic operation
In the sequence that is shown on the display, arrows will be displayed
between the buttonhole forms.
–
After s ewing a buttonhole, the control will change automatically to
the next buttonhole form.
–
After sewing the last buttonhole, the control will change again to
the first buttonhole within the sequence.
–
The current buttonhole will be indicated w ith a bar.
–
The form of each chosen buttonhole will be s hown in the left half of
the display.
02–05–12–09 Manualoperation
In the sequence that is shown on the display, no arrows will be
displayed between the buttonhole forms.
–
The control does not change automatically between the buttonhole
forms.
–
The current buttonhole will be indicated w ith a bar.
–
The form of each chosen buttonhole will be s hown in the left half of
the display.
Change betw een automatic and manual operation
–
Choose the relevant line in which the current sequence is
displayed using the arrow keys ñ and ò
–
Press the OK-key.
–
Change between the two operational modes using the arrow keys
ñ and ò.
–
Confirm by pressing the OK-key.
1
23